Author Topic: Help, power dead to my SE9 after alarm went off  (Read 1354 times)

0 Members and 1 Guest are viewing this topic.

Offline clyle2000

  • Newbie
  • Posts: 1
  • Respect 0
  • Gender: Male
    • No car yet
Help, power dead to my SE9 after alarm went off
« on: January 23, 2022, 15:35:13 PM »
The alarm went off on my SE9 and the next day the car has zero power, no dash, no cabin light not a thing.

Battery is fine, 30amp fuses fine any ideas?

Chris

Offline Jepwee

  • Calibra Rookie
  • Posts: 142
  • Respect 2
  • Gender: Male
    • Cally 2.0i 8v
Re: Help, power dead to my SE9 after alarm went off
« Reply #1 on: January 24, 2022, 16:05:10 PM »
Hi, does the engine check light flash, is would indicate a immobiliser fault. The hand book says "turn key to position O wait 2 seconds then try to start. Failing that you could check the Calibraclub net, go to search, put in immobiliser and there is 11 posts on problems. Page 7 and 8 maybe of help and they mention fuse 11 also the immobiliser unit which they say holds 2 relays soldered to the printed circuit board. They say the unit is behind the passenger foot well.
Hope it helps