« previous next »
Pages: [1]   Go Down

Author Topic: Help please with o ring part number  (Read 4609 times)

0 Members and 1 Guest are viewing this topic.

Offline oxide32

  • Newbie
  • Posts: 48
  • Respect 0
Help please with o ring part number
« on: September 08, 2020, 11:41:58 AM »
Could some kind member please help with the part number for the oring on the water transfer pipe that is on the right side of the c25xe cylinder head just below the coil pack, it has 3 water outlet pipes made of steel , two small and one large to radiator, I could use silicone sealer but don't wanna bodge anything, the part number for the transfer pipe is. 90448170. Thank you.
Logged

Offline Jepwee

  • Calibra Rookie
  • Posts: 142
  • Respect 2
  • Gender: Male
    • Cally 2.0i 8v
Re: Help please with o ring part number
« Reply #1 on: September 08, 2020, 19:10:05 PM »
Hi, Have you looked at the Opel parts site. Go on cooling section, then c25xe image it shows to o rings. I don't know if these are the right ones but have a look.
Logged

Offline oxide32

  • Newbie
  • Posts: 48
  • Respect 0
Re: Help please with o ring part number
« Reply #2 on: September 08, 2020, 19:12:45 PM »
hi again mate. i did take a look but it doesnt show many of the pictures for the orings it lists, wondering if i may be better using some good old fashioned sealer. might be a lot less hastle. thanks a lot for taking the time to answer.
Logged

Offline Jepwee

  • Calibra Rookie
  • Posts: 142
  • Respect 2
  • Gender: Male
    • Cally 2.0i 8v
Re: Help please with o ring part number
« Reply #3 on: September 08, 2020, 19:43:44 PM »
Hi I know this is a daft question is it leaking due to the o ring. If so can you not find a replacement or is it a bugger to get at. Halfords do packs of various sizes of o rings maybe you could try there,only a thought. Maybe agw9262 in Sweden will come up with answer ,he's pretty good at these sort of queries.
Logged

Offline agw9262

  • Calibra Rookie
  • Posts: 366
  • Respect 4
  • Gender: Male
    • Cally 2.5i v6
Re: Help please with o ring part number
« Reply #4 on: September 08, 2020, 20:58:44 PM »
I’ll try to check the parts catalogues I have tomorrow if I get a chance to see if it’s shown on those.


Sent from my iPhone using Tapatalk
Logged

Offline oxide32

  • Newbie
  • Posts: 48
  • Respect 0
Re: Help please with o ring part number
« Reply #5 on: September 08, 2020, 21:32:34 PM »
Thank you all, id like to keep things genuine rather than use sealant.
Logged

Offline agw9262

  • Calibra Rookie
  • Posts: 366
  • Respect 4
  • Gender: Male
    • Cally 2.5i v6
Re: Help please with o ring part number
« Reply #6 on: September 09, 2020, 09:02:01 AM »
Hi, I managed to check TIS - March 2013 but the part isn’t shown anywhere and a search of the catalogue for the part number brings up no results  [emoji53]


Sent from my iPhone using Tapatalk
Logged

Offline oxide32

  • Newbie
  • Posts: 48
  • Respect 0
Re: Help please with o ring part number
« Reply #7 on: September 10, 2020, 09:13:00 AM »
Thanks for taking a look for me mate, I'll get some sealant and that should do just as good a job, thanks anyway.
Logged
Pages: [1]   Go Up
« previous next »