Author Topic: Calibra CweLET  (Read 32122 times)

0 Members and 1 Guest are viewing this topic.

Offline UndYinG

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 167
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Calibra CweLET
« Reply #30 on: August 05, 2017, 12:10:09 PM »
THANKS!

Changed the wheels, havent got time to try some rear lowering


Bought used hybrid and reconditioned it, im slowly getting ready for high boost. Amal valve is leaking so ima put MBC and drive standard boost.



Im testing BT A2DP streaming + Handsfree, mic is in its temporary position, so far so good.




Finally my model has arrived, its so detailed!1!

A Collector Never Stops Collecting!1!!

Offline will

  • Trade Count: (1)
  • Calibra Expert
  • Posts: 1807
  • Respect 0
  • Gender: Male
    • Cally 2.0i 8v
Re: Calibra CweLET
« Reply #31 on: August 14, 2017, 09:50:34 AM »
Very nice indeed  :)
Drives: an original SE6 auto, 86,000 miles (approx) and still going strong......(but some work is needed!). Now my second car.

Offline UndYinG

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 167
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Calibra CweLET
« Reply #32 on: August 29, 2018, 14:25:29 PM »
If you wanna see pics from above, just quote my post and swap postimg.org with postimg.cc

I was not posting for a while but we are still driving ;)

PK Tuning show august 2017





Some random photos





Hybrid turbo and walbro 255lph




Last summer I've bougt this modifield TXB





A month ago I've managed to put it on the car, it works just fine, now pressure plate seal CANNOT FAIL ;):

I have found these 17" used wheels, ordered 'em immediately, when package arrived i realized wheels are chinese so I've returned it. Learned there are no original 5x110 17" just 18" so i got horny and got 18s :)

 

Got new nankang ns2 ultra sport 215/35R18









PK Tuning show #2 august 2018



Finally I've had to break seal's on my oldschool amp to do minor soldering, now both amps are open, too bad one PCB is green not blue like the other :)



So far so good, walbro still sleeps under my desk :), today I've put SAAB Reds :)

A Collector Never Stops Collecting!1!!

Offline Faur Sergiu

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 102
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Calibra CweLET
« Reply #33 on: August 29, 2018, 18:58:05 PM »
Nice cally mate , have the saab reds on ph 3 eds with 4.5 fuel pressure. What turbo are you useing?

Offline UndYinG

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 167
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Calibra CweLET
« Reply #34 on: August 29, 2018, 20:46:32 PM »
Thanks mate. I was running same pressure on ph3 with reds earlier :), now im on standard chips and standard boost. Turbo is stock k16 but rebuilt to hybrid...
A Collector Never Stops Collecting!1!!

Offline UndYinG

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 167
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Calibra CweLET
« Reply #35 on: August 30, 2018, 09:25:40 AM »
Hey, i was thinking about fuel pressure we talked about, i might have been running 4.0bar, anywayz i have melted 3rd piston but with standard IC and standard fuel pump.

Ive checked eds site and it states 4.5bar for standard yellows, you might be overfueling :). Quote from the eds site:

"Phase3 The fuel pressure must be raised at original injectors to 4.50 bar. Alternatively, 470ccm fuel injectors with 3.00 bar fuel pressure can be used."
A Collector Never Stops Collecting!1!!

Offline Faur Sergiu

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 102
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Calibra CweLET
« Reply #36 on: August 30, 2018, 11:03:25 AM »
Yes , I know but ifif the fuel pressure is 4.5 bar=22% more fuel for normal 3bar injectors  and 360cc saab red with 4.5 bar is equal to 440cc injectors on 3 bar

Offline Faur Sergiu

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 102
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Calibra CweLET
« Reply #37 on: September 01, 2018, 14:39:46 PM »
Hi dont put saab reeds injectors on phase 2 or 3 trust me i've melted a piston this week for lean fuel mixture go for 470cc

Offline UndYinG

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 167
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Calibra CweLET
« Reply #38 on: September 01, 2018, 14:47:39 PM »
Hehe, been there... Look what I've bought earlier today, TOTALLY UNPLANNED...





Anywayz, how was your fuelling? Fuel pump? Often pump gets less voltage so u have to make new wiring especially on old types where pump is outside... And we never do AFR check we just set pressure n injectors and drive full boost, right :D

btw im sorry bout melting ):
A Collector Never Stops Collecting!1!!

Offline Faur Sergiu

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 102
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Calibra CweLET
« Reply #39 on: September 01, 2018, 19:49:27 PM »
Glad you made the right choice at the right time and put bigger injectors  :) , today when i was at the mechanic he showed me the horror :'( I'm done now, need to buy forge pistons, new injectors(470cc) and a new cylinder  head (coscast) and the hard part is that i can't find a coscast head they ar hard to find, check out this picture its horror :'(

Offline UndYinG

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 167
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Calibra CweLET
« Reply #40 on: September 02, 2018, 00:04:52 AM »
haha mate, that is fully working piston "like new" here in serbia.

Check mine from few years ago1!!1 THIS IS HOW YOU MELT A PISTON...

https://postimg.cc/image/l2ljvgyah/
A Collector Never Stops Collecting!1!!

Offline Faur Sergiu

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 102
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Calibra CweLET
« Reply #41 on: September 05, 2018, 10:32:25 AM »
Wow thats one ugly piston, i have a question do you know where i could buy a Coscast head for my c20let?

Offline UndYinG

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 167
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Calibra CweLET
« Reply #42 on: September 05, 2018, 10:37:32 AM »
ebay.de :)
A Collector Never Stops Collecting!1!!

Offline Faur Sergiu

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 102
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Calibra CweLET
« Reply #43 on: September 06, 2018, 12:52:32 PM »
Thx i've searched but didn't find one can you give me a link pls :)

Offline UndYinG

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 167
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
A Collector Never Stops Collecting!1!!