Official Vauxhall/Opel/Holden Calibra Technical Community

Calibra Modifications & Calibra Maintenance => Calibra FAQs & Guides => Requests & Submissions => Topic started by: 09clubman91 on April 08, 2013, 18:06:23 PM

Title: Looking for a guide to changing the clutch on calibra turbo
Post by: 09clubman91 on April 08, 2013, 18:06:23 PM
Hi all,
Have searched and looked around with no luck, if anyone could point me in the direction of some sort of guide...to changed the clutch on my calibra turbo 4x4 1995.
Thanks
Title: Re: Looking for a guide to changing the clutch on calibra turbo
Post by: easybeast on September 01, 2013, 03:17:08 AM
this might help just a little :)

http://www.cavalierturbo.com/downloads/workshop_manual/C20LETWorkshopManual.pdf (http://www.cavalierturbo.com/downloads/workshop_manual/C20LETWorkshopManual.pdf)
Title: Re: Looking for a guide to changing the clutch on calibra turbo
Post by: vexorg on September 01, 2013, 10:41:20 AM
Drop the engine and gearbox out. Very simplified summary of what's involved:

Disconnect all hoses, wires, cables, linkages, etc round the engine and gearbox.
Jack the car up high.
Pop the driveshaft and bottom balljoints out.
Drop the subframe.
Remove exhaust front pipe
Disconnect propshaft
Support the engine then undo the engine mount bolts and drop it down.
Remove the transfer box (not necessary just a lot easier).
Remove the gearbox
Title: Re: Looking for a guide to changing the clutch on calibra turbo
Post by: 09clubman91 on September 01, 2013, 12:16:29 PM
Hi mate,
Thanks for the reply, But this was sorted a while ago.
Could be handy for other people after a guide to do the same job.

Cheers,
Mark.
Title: Re: Looking for a guide to changing the clutch on calibra turbo
Post by: vexorg on September 01, 2013, 14:18:45 PM
Didn't notice the date, sorry. There's seems to be someone resurrecting older topics.