Author Topic: Coolant fan  (Read 145 times)

0 Members and 1 Guest are viewing this topic.

Offline chezan

  • Trade Count: (0)
  • Newbie
  • Posts: 6
  • Respect 0
  • Gender: Male
    • Cally 2.5i v6
Coolant fan
« on: May 18, 2018, 12:35:24 PM »
Hi all
V6 Calibra 1994
I have rebuilt the car with nearly new everything spent about two years on it there is one problem I can't get to the bottom of.
The coolant fan kicks in as normal after a run then cuts out after around 20 mins so far so good, it then decides to cut in and out for the rest of the day while parked up and cold? I have changed the coolant bridge sensor and the rad sensor and also saw a post about fuse two so changed that also someone said that It could be the ECU? any help on this would be much appreciated.

Offline Faur Sergiu

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 68
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Coolant fan
« Reply #1 on: May 18, 2018, 17:55:20 PM »
 the fan starter (radiator sensor ) don't know what is called in english, try replace that if not check  the wires

Offline TURBOHEAD

  • Trade Count: (1)
  • Calibra Rookie
  • Posts: 273
  • Respect 1
  • Gender: Male
    • Cally 16v Turbo
Re: Coolant fan
« Reply #2 on: May 18, 2018, 19:48:39 PM »
Hi guys

You also will have a fan relay...........not sure where it is on a V6.............A faulty relay can cause running problems.

Hope this helps.

Offline Faur Sergiu

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 68
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Coolant fan
« Reply #3 on: May 18, 2018, 21:32:08 PM »
Hi, yes thats a good idea to check the fan relay

Offline chezan

  • Trade Count: (0)
  • Newbie
  • Posts: 6
  • Respect 0
  • Gender: Male
    • Cally 2.5i v6
Re: Coolant fan
« Reply #4 on: May 19, 2018, 09:34:46 AM »
Thanks for the advice so far. Managed to find a new fan relay In Germany so will let you know the outcome. Cheers