Author Topic: Guide to Fitting AngelEye Headlights + Bumper Removal  (Read 22510 times)

0 Members and 1 Guest are viewing this topic.

Offline

  • Trade Count: (2)
  • Calibra Expert
  • Posts: 3108
  • Respect 0
  • Gender: Male
    • Cally 2.5i v6
Re: Guide to Fitting AngelEye Headlights + Bumper Removal
« Reply #15 on: February 11, 2008, 20:39:00 PM »
indicators have to be orange.the fog and dip adjust together.there are two adjusters on the back.the one near the fog is for vertical and the one by dip is for horizontal aim, the high beam has three adjusters and can be adjusted indenpently.

Cheers mate, i'll get some orange bulbs tomorrow hopefully. Also I hope those 'adjusters' are on my angel eyes as well. Not something i've played around with before so didn't really look/notice, but i will need to adjust them to be a bit lower as i'm dazzling everyone at the moment
'95 V6 (Diamond Black)
'97 V6 SE9

Offline Rhino

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 191
  • Respect 0
  • Gender: Male
    • Cally 16v Redtop
Re: Guide to Fitting AngelEye Headlights + Bumper Removal
« Reply #16 on: February 28, 2008, 13:35:26 PM »
indicators on the small pegeout are towards the middle of the car the same as these, i aint to worried about plod, they have seen mine and they havn't given me a tug yet just wait for the mot if they fail i will, just put my old lights back in for a day lol
Dave
Braintree, Essex

Offline ClubCalibra

  • Administrator
  • Trade Count: (0)
  • *
  • Posts: 5070
  • Respect 5
  • Gender: Male
    • Other Brand
Re: Guide to Fitting AngelEye Headlights + Bumper Removal
« Reply #17 on: June 28, 2008, 13:06:29 PM »
Brilliant guide mate, good work and incredibly detailed. 200 shop credits rewarded!!

Topic moved and cleaned.
* Click Here to get your ClubCalibra Window Stickers!!
* Click Here for CHEAPER CAR INSURANCE through ClubCalibra.com!
* Click Here to add your Member Pin to our map!!!
* Click Here to add your car!

Offline

  • Trade Count: (2)
  • Calibra Expert
  • Posts: 3108
  • Respect 0
  • Gender: Male
    • Cally 2.5i v6
Re: Guide to Fitting AngelEye Headlights + Bumper Removal
« Reply #18 on: June 30, 2008, 18:31:18 PM »
Thanks a lot Ash :)
'95 V6 (Diamond Black)
'97 V6 SE9

gillam682

  • Guest
  • Trade Count: (0)
Re: Guide to Fitting AngelEye Headlights + Bumper Removal
« Reply #19 on: February 22, 2010, 00:48:37 AM »
i have these exact same lights, where do u find the plug the angel eyes go into?

phenoxymethyl

  • Guest
  • Trade Count: (0)
Re: Guide to Fitting AngelEye Headlights + Bumper Removal
« Reply #20 on: February 22, 2010, 01:18:30 AM »
Ok nice storm look awesome, theres some angel eyes, old type on pistonheads if any one wants. 50 quids.

Offline

  • Trade Count: (2)
  • Calibra Expert
  • Posts: 3108
  • Respect 0
  • Gender: Male
    • Cally 2.5i v6
Re: Guide to Fitting AngelEye Headlights + Bumper Removal
« Reply #21 on: February 22, 2010, 11:10:19 AM »
i have these exact same lights, where do u find the plug the angel eyes go into?

It was 2 years ago i did this, so hard to remember exactly, but the main connector for the angel eyes, should just plug straight into the existing/original connector on your Cally. It should be fairly obvious, unless someone has been messing around with the wiring and has removed the original connector(s) for some reason.

Have you checked both sides?

Does it look like the wiring or connectors have been messed about with in anyway?
'95 V6 (Diamond Black)
'97 V6 SE9

Offline Rhino

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 191
  • Respect 0
  • Gender: Male
    • Cally 16v Redtop
Re: Guide to Fitting AngelEye Headlights + Bumper Removal
« Reply #22 on: February 22, 2010, 14:04:41 PM »
i had these lights they failed them twice as the inner lights were illegal colour in their words, they adjusted the the lights for me, only to blow an angel eye bulb, improved lighting no not really best off getting ultra blue bulbs from vaux-world had a few probs with these lights replaced them with standard headlights with ultra bulbs far better now adjustment mechanism is crap wind it to far and the screw comes out of the plastic nut and you have to strip the light to gt it back together
Dave
Braintree, Essex

Offline

  • Trade Count: (2)
  • Calibra Expert
  • Posts: 3108
  • Respect 0
  • Gender: Male
    • Cally 2.5i v6
Re: Guide to Fitting AngelEye Headlights + Bumper Removal
« Reply #23 on: February 22, 2010, 15:11:55 PM »
Yep the standard bulbs that came with mine were illegal (just standard clear ones as i remember). I bought a couple of orange bulbs from Halfrauds though and all sorted.
'95 V6 (Diamond Black)
'97 V6 SE9

Offline TsEtSoMaN

  • Trade Count: (0)
  • Newbie
  • Posts: 43
  • Respect 0
  • Gender: Male
    • Cally 16v Redtop
Re: Guide to Fitting AngelEye Headlights + Bumper Removal
« Reply #24 on: February 22, 2010, 16:47:43 PM »
Very helpful tutorial,thanks!Just bought a new headlamp washer wondering how to remove the bumper.

wankling

  • Guest
  • Trade Count: (0)
Re: Guide to Fitting AngelEye Headlights + Bumper Removal
« Reply #25 on: March 07, 2010, 20:22:06 PM »
can anyone post some pictures for the beam adjustment on these lights???

Offline redtop_elston

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 200
  • Respect 0
  • Gender: Male
Re: Guide to Fitting AngelEye Headlights + Bumper Removal
« Reply #26 on: April 05, 2010, 23:28:58 PM »
wicked guide mate cheers, im doing mine in two weeks!!