Official Vauxhall/Opel/Holden Calibra Technical Community

Calibra Modifications & Calibra Maintenance => Handling, Suspension and Wheels => Topic started by: brblom on January 16, 2018, 11:55:01 AM

Title: rear shock absorber upper mount sleeve spacer Pn 90334270
Post by: brblom on January 16, 2018, 11:55:01 AM
Hi,
does anyone know the dimensions of the sleeve spacer that is part of the rear shock absorber upper mount?

mine are rusty, i can't find new ones, i have access to lathes n stuff so i can make them but as mine are rusty i don't know the correct dimensions. i've fitted the rusty ones back to the car with the new shocks and rubbers but the passenger side is noisy.

thanks in advance
Title: Re: rear shock absorber upper mount sleeve spacer Pn 90334270
Post by: Rachelnut on February 13, 2018, 04:47:45 AM
I do not know too But I want to know a lot. Hopefully someone will know. Thank you for answer
Title: Re: rear shock absorber upper mount sleeve spacer Pn 90334270
Post by: cal16v on February 20, 2018, 04:27:46 AM
These are available from autovaux (https://www.autovaux.co.uk/90334270-spacer-sleeve-gp90334270)... min qty 5 (sealed bag) as I recall.

If you want to machine your own;

L= 38mm
OD = 15.7mm
ID = 10mm

cheers
Title: Re: rear shock absorber upper mount sleeve spacer Pn 90334270
Post by: Ericnut on April 17, 2018, 09:13:58 AM
I'm going to change the shocks. Can you recommend me?
Title: Re: rear shock absorber upper mount sleeve spacer Pn 90334270
Post by: EddeyDancer on August 04, 2018, 02:19:18 AM
Corsa upper mounts and bushings are compatible