Author Topic: Both c20xe cams on c20let? need advice  (Read 1908 times)

0 Members and 1 Guest are viewing this topic.

Offline Faur Sergiu

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 101
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Both c20xe cams on c20let? need advice
« on: November 20, 2017, 20:13:12 PM »
Both c20xe cams on c20let? reliability? Power? is it good for the turbo? i've heard that the turbo kicks in at about 4500 rpm  ;D , need some advice please, thanks

Offline greendream

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 200
  • Respect 0
  • Gender: Male
    • Cally 3.0i v6
Re: Both c20xe cams on c20let? need advice
« Reply #1 on: November 20, 2017, 20:20:29 PM »
Well timed it's a good and cheap mod but only if you still have an uprated map,from eds ph 2 or more it is worth while


Inviato dal mio iPhone utilizzando Tapatalk
C20NE becomed C30XE+X25XE+C20LET 3 Cali is better than one

Offline Faur Sergiu

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 101
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Both c20xe cams on c20let? need advice
« Reply #2 on: November 20, 2017, 20:33:35 PM »
Thanks for advice, i have eds ph 3, and i thought its a good idea for normal dirve because i wont use the turbo much until ~4500 rpm, it is reliable for the turbo?

Offline Faur Sergiu

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 101
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Both c20xe cams on c20let? need advice
« Reply #3 on: November 22, 2017, 21:06:55 PM »
In c20xe ar use more then one type of camshaf for example '91 c20xe uses the same camshaft as '94  C20xe or 2.5 motronic uses the same as 2.8, are all the same ? pls help

Offline Faur Sergiu

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 101
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Both c20xe cams on c20let? need advice
« Reply #4 on: January 03, 2018, 20:37:12 PM »
the camshaft (both) form motronic 2.5 c20xe are different from motronic 2.8 c20xe, which should i use on a c20let? Thank

Offline greendream

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 200
  • Respect 0
  • Gender: Male
    • Cally 3.0i v6
Re: Both c20xe cams on c20let? need advice
« Reply #5 on: January 16, 2018, 22:52:43 PM »
Don't think so Sergiu, I guess they are both the same. You need only inlet c20xe cam, not useful exhaust one
C20NE becomed C30XE+X25XE+C20LET 3 Cali is better than one

Offline Faur Sergiu

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 101
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Both c20xe cams on c20let? need advice
« Reply #6 on: January 18, 2018, 09:07:55 AM »
hy Greendream, if  use only the inlet cam i would be needing some adjustment? i read that i will be needing an adjustable cam pully, and its has to be set correctly, is there some trick to use it without the adjustable cam pully? thanks mate

Offline greendream

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 200
  • Respect 0
  • Gender: Male
    • Cally 3.0i v6
Re: Both c20xe cams on c20let? need advice
« Reply #7 on: January 18, 2018, 18:32:40 PM »
-7deg (retard) is the right set-up. You can do a decentralization on pin hole seat on cam pulley. Once fitted shim gap with a small metal piece and lock cam pulley.
Job done!
C20NE becomed C30XE+X25XE+C20LET 3 Cali is better than one

Offline Faur Sergiu

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 101
  • Respect 0
  • Gender: Male
    • Cally 16v Turbo
Re: Both c20xe cams on c20let? need advice
« Reply #8 on: January 20, 2018, 09:56:30 AM »
Thanks a lot

Offline greendream

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 200
  • Respect 0
  • Gender: Male
    • Cally 3.0i v6
Re: Both c20xe cams on c20let? need advice
« Reply #9 on: January 20, 2018, 16:40:10 PM »
u'r welcome m8 :-)
C20NE becomed C30XE+X25XE+C20LET 3 Cali is better than one