Author Topic: Code reader for cablibra 1994  (Read 423 times)

0 Members and 1 Guest are viewing this topic.

Offline Calibra55

  • Trade Count: (0)
  • Newbie
  • Posts: 1
  • Respect 0
  • Gender: Male
    • No car yet
Code reader for cablibra 1994
« on: January 02, 2020, 12:45:58 PM »
Hi does anyone know where I can purchase a code reader for a calibration 1994

Offline agw9262

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 349
  • Respect 4
  • Gender: Male
    • Cally 2.5i v6
Re: Code reader for cablibra 1994
« Reply #1 on: January 02, 2020, 13:40:38 PM »
You have a few options, from free to very expensive.

You can use a paperclip or short length jumper wire to trigger the built in diagnostics flash - engine management light flashes - then count the flashes. More here: http://www.clubcalibra.com/common-problems/guide-to-reading-ecu-codes/

Or you can buy opcom or similar from eBay or the likes - only works on the later models.

Finally you can buy the official GM reader but these tend to be very expensive.

Hope this helps.




Sent from my iPhone using Tapatalk

Offline Steva

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 209
  • Respect 1
  • Gender: Male
    • Cally 16v Turbo
Re: Code reader for cablibra 1994
« Reply #2 on: January 12, 2020, 06:44:16 AM »
I have tech 1 & tech 2 for my calibra they weren't cheap but they save me visiting garages


Steva

Offline agw9262

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 349
  • Respect 4
  • Gender: Male
    • Cally 2.5i v6
Re: Code reader for cablibra 1994
« Reply #3 on: January 12, 2020, 10:00:08 AM »
Out of interest Steva, which one is used for which models of the Calibra?


Sent from my iPhone using Tapatalk

Offline Steva

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 209
  • Respect 1
  • Gender: Male
    • Cally 16v Turbo
Re: Code reader for cablibra 1994
« Reply #4 on: January 16, 2020, 22:39:29 PM »
Tech 1

C20NE
C20XE
C20LET
C20XEV
C25XE

Tech 2

X20XEV
X25XE

Steva