Author Topic: 4 wheel drive light on n reg 4x4 turbo  (Read 1615 times)

0 Members and 1 Guest are viewing this topic.

Offline migel wilcox

  • Trade Count: (0)
  • Newbie
  • Posts: 3
  • Respect 0
  • Gender: Male
    • No car yet
4 wheel drive light on n reg 4x4 turbo
« on: November 22, 2016, 21:28:16 PM »
can anyone help with why the 4wheel light is on  on my N reg
4x4 turbo calibra. Also anyone know where to get a body kit for
the same car.

Offline sealeysonic

  • Trade Count: (2)
  • Calibra Mentor
  • Posts: 5849
  • Respect 7
  • Gender: Male
    • Cally SE
Re: 4 wheel drive light on n reg 4x4 turbo
« Reply #1 on: November 23, 2016, 09:55:01 AM »
One post and its a question......nice introduction ;-)

Ok i dont know about the 4x4 issue.........what sort of body kit you looking for...? most ppl are going back to standard.

Offline agw9262

  • Trade Count: (0)
  • Calibra Rookie
  • Posts: 343
  • Respect 4
  • Gender: Male
    • Cally 2.5i v6
Re: 4 wheel drive light on n reg 4x4 turbo
« Reply #2 on: November 23, 2016, 22:17:08 PM »
Assuming it's got two airbags given the reg then paperclip test won't work since the transfer box ECU lacks diagnostic capabilities that the earlier models had. Could be that the system lacks pressure or is air locked. I'd recommend a poke around here http://www.cav16.co.uk/transfer/

Offline CalibraTurbo666

  • Trade Count: (1)
  • Calibra Expert
  • Posts: 1901
  • Respect 2
  • Gender: Male
    • Cally 16v Turbo
Re: 4 wheel drive light on n reg 4x4 turbo
« Reply #3 on: November 27, 2016, 20:28:19 PM »
1st thing to check is fuse 19, if its out and you put it in...and ....fluid goes everywhere....then that is why the fuse was out

You cant tell if you can read the codes by the number of airbags all mine apart from the k reg have 2 airbags and all can have tx box codes read out with paperclip