Topic: Guide to Calibra Paint Codes/Names (Read 7689 times)

Mr V · « **Reply #60 on:** August 15, 2007, 21:13:24 PM »

Sorry don't undertand your question ?

matty0785 · « **Reply #61 on:** August 15, 2007, 21:21:35 PM »

somone i know had got a black cally thats not metalic paint i though that they were an se but not sure what special edition it is

Mr V · « **Reply #62 on:** August 15, 2007, 21:26:19 PM »

Here's a guide to the SE's

http://www.geocities.com/the_calibra_se/

matty0785 · « **Reply #63 on:** August 15, 2007, 21:31:51 PM »

thanks buddy thats what i needed

diyivi · « **Reply #64 on:** December 16, 2007, 18:54:02 PM »

My calibra is a color bermuda green 366

smiley55 · « **Reply #65 on:** November 06, 2008, 18:27:52 PM »

Ok mine is white one says its Glacier and the other says it Polar and I am told its the same difference. The plate says E474 631.97.......anyway its white and very dirty at the minute, especially where the dirt runs from under the spoiler

J@zV6 · « **Reply #66 on:** November 07, 2008, 12:18:07 PM »

Quote from: smiley55 on November 06, 2008, 18:27:52 PM

Ok mine is white one says its Glacier and the other says it Polar and I am told its the same difference. The plate says E474 631.97.......anyway its white and very dirty at the minute, especially where the dirt runs from under the spoiler

If it's Glacier White, the dirt must be a morraine...

smiley55 · « **Reply #67 on:** November 20, 2008, 09:17:26 AM »

Absolute nightmare! I alway clean it myself and the weather is against me haha

J@zV6 · « **Reply #68 on:** November 20, 2008, 12:45:51 PM »

Black and white cars both seem to show dirt more than almost any other colour.

joshwilliams · « **Reply #69 on:** April 18, 2009, 01:42:00 AM »

ok this is gonna sound really stupid, but i can't seem to match this code to any in the table. am i reading it incorrectly? please help me

gorytus · « **Reply #70 on:** April 18, 2009, 05:55:55 AM »

e369 is 'Rio Verde Green'

gorytus · « **Reply #71 on:** April 18, 2009, 06:22:55 AM »

josh, on that vin plate, you will find your chassis number. It will start:

WOL000085

then there will be a letter between K&V. What is the very next number after that letter?
Just curious to see where yours is made.

joshwilliams · « **Reply #72 on:** April 18, 2009, 11:39:35 AM »

Quote from: garyb on April 18, 2009, 06:22:55 AM

josh, on that vin plate, you will find your chassis number. It will start:

WOL000085

then there will be a letter between K&V. What is the very next number after that letter?
Just curious to see where yours is made.

the number after that letter is 9. what does that mean? another question, as u seem to know a bit. where abouts do i find the exact model of my car? its driving me up the wall as i don't current have a manual for it!

capecodcarman · « **Reply #73 on:** April 18, 2009, 11:45:25 AM »

Quote from: joshwilliams on April 18, 2009, 11:39:35 AM

the number after that letter is 9. what does that mean? another question, as u seem to know a bit. where abouts do i find the exact model of my car? its driving me up the wall as i don't current have a manual for it!

On the V5 log for the vehicle it will tell you if its an SE etc. Or whatever the equivalent is in Aus!!

joshwilliams · « **Reply #74 on:** April 18, 2009, 11:48:26 AM »

Quote from: capecodcarman on April 18, 2009, 11:45:25 AM

On the V5 log for the vehicle it will tell you if its an SE etc. Or whatever the equivalent is in Aus!!

v5 log? sorry i'm not too sure what you mean by that..

gorytus · « **Reply #75 on:** April 18, 2009, 11:49:07 AM »

9?
'Tis the number of the General Motors manaf. plant

9 means it was made in Uusikaupunki, Finland.

GM also used Rüsselsheim, Germany (#1) for the calibra. Being a Holden , I was curious to see if they were made locally.

Quote

where abouts do i find the exact model of my car?

You have a Calibra V6 with one of two engines. If you post the rest of your chassis number , particularly the letter I mentioned earlier, the V6 bods on here can confirm which of the two you have. ( One of the V6 kingpins is online now so hurry along..)

capecodcarman · « **Reply #76 on:** April 18, 2009, 11:50:14 AM »

That's the vehicle registration document in the UK....you must have something similar in Aus presumably?

joshwilliams · « **Reply #77 on:** April 18, 2009, 12:07:30 PM »

Quote from: garyb on April 18, 2009, 11:49:07 AM

9?
'Tis the number of the General Motors manaf. plant

9 means it was made in Uusikaupunki, Finland.

GM also used Rüsselsheim, Germany (#1) for the calibra. Being a Holden , I was curious to see if they were made locally.
You have a Calibra V6 with one of two engines. If you post the rest of your chassis number , particularly the letter I mentioned earlier, the V6 bods on here can confirm which of the two you have. ( One of the V6 kingpins is online now so hurry along..)

The number is W0L00005T9003333

gorytus · « **Reply #78 on:** April 18, 2009, 12:11:23 PM »

Ah a T chassis. Means its galvanised ( thats good..) and probably the later 288mm brake discs ( good too

)

You may well have the X25XE rather than the C25XE engine, do you see either of these engine codes on your documents?

joshwilliams · « **Reply #79 on:** April 18, 2009, 12:14:30 PM »

Quote from: garyb on April 18, 2009, 12:11:23 PM

Ah a T chassis. Means its galvanised ( thats good..) and probably the later 288mm brake discs ( good too )

You may well have the X25XE rather than the C25XE engine, do you see either of these engine codes on your documents?

nah the guy who is letting me pay it off to him still has all the documents, well atleast i think he does, but thats why im trying to find out. i dont know what engine it has at all...

Author Topic: Guide to Calibra Paint Codes/Names (Read 7689 times)

matty0785

matty0785

gorytus

gorytus

gorytus

gorytus